|
|
Three-cylinder Engines
Kočvara, Antonín ; Janoušek, Michal (referee) ; Drápal, Lubomír (advisor)
The main purpose of this thesis is to summarize the progress of four-stroke straight-three engines from the beginning of their production to these days in perspective of parameters and construction. Another goal is to show reasons for their exploitation. The reasons of exploitation are mostly compared to four-cylinder engine and some of them are supported by a calculation. There is also a chapter showing force acting in power train and its influences on straight-three engines. The closing part is dealing with possible ways in future development of straight-three engines.
|
|
|
The Cylinders of Four-stroke Engines
Vanda, Marek ; Řehák, Kamil (referee) ; Dlugoš, Jozef (advisor)
The topic of this bachelor thesis is Cylinders of Four-stroke Engines. First part is about four-stroke cycle, engine construction. Next parts are about cylinders, their function and requirements. Also included is the importance of the cylinders on the engine operation and engine life. Last part is focused on the construction, materials of the cylinders and their usage in the past and today.
|
|
|
Engine Block for Diesel Engine 2.0 L
Kudlík, Michael ; Ramík, Pavel (referee) ; Svída, David (advisor)
This diploma thesis describes the problems of the engine block and crankcase. As a one of the most imprortant and first part of this task is creating a 3D simulation model of a engine block and calculating load forces of engine block. The simulation and evaluation of the solution are calculated by using method finite element, software Ansys. The conclusion and ending point of the od the diploma thesis construction desing of stiffness increase.
|
|
|
Thermal-Mechanical Analysis of the Cylinder of the Four-stroke Engine
Ptáček, Petr ; Raffai, Peter (referee) ; Dlugoš, Jozef (advisor)
This diploma thesis is focused on creating a finite element method model of a four-stroke engine with a purpose to determine an impact on cylinder bore distortion caused by several types of loading. Introduction of this work covers research of possibilities in modelling thermal-structural analysis of cylinder liner and verifications of the analysis results. An Ansys model was further created and cylinder liner radial deformation caused by head bolts tightening and thermal loading coming from combustion was determined. Finally, a whole engine working cycle was simulated with a gas pressure loading and its final impact on the total cylinder liner radial deformation was defined.
|
|
|
Common-rail System for 4-cylinder CI-engine
Ošmera, Petr ; Svída, David (referee) ; Dundálek, Radim (advisor)
This diploma thesis with a view to „common rail system for 4-cylinder CI-engine“ deals with the application of modern injection system „common rail“ to already existing compression-ignition tractor engine. The diploma thesis treats of the most necessary adjustments related with the replacement of injection systems which was solved in the way of the minimum adjustments. This kind of solution deals with an economic aspect of the problem. The reconstruction contains the engineering design of development of high pressure components and the suitability of their placing on engine.The primary adjustment of the application of system „common rail“ for existing tractor engine confirmed the possibility of this reconstruction.
|
|
|
Solution of Engine Block Deformations during Assembling
Foltis, Aleš ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
Size and distribution of mount deformation are the main topics discussed in this thesis, using different static loading. The thesis’ primary focus is to show how deformation and stress of the engine block with cylinder liner are affected in the assembly order of the cylinder head. The calculation and evaluation of the solution are calculated by using method finite element, software Ansys. In addition other methods are discussed which can also measure the deformation of the engine block.
|
|
|
Structural Analysis of an Engine Block Design
Chevtaikin, Sergei ; Dlugoš, Jozef (referee) ; Drápal, Lubomír (advisor)
This master thesis focuses on structural analysis of combustion engine block. The main goal of this work was the design and compare individual solutions of long and short engine’s blocks. First part of work shows existing engine block designs and solutions. Based on the research part, the CAD design of the engine blocks and their discretization was performed by pre-processor programs. Structural analysis and their final comparison were provided by FEM and MBS programs.
|
|
|
Engine Block Design of Aircraft Powertrain
Kuzník, Bořek ; Drápal, Lubomír (referee) ; Novotný, Pavel (advisor)
This thesis describes the problems of the engine block and crankcase. There is solution of structural design and contains the engineering design of invert six-cylinder engine block with water cooling. Thesis deals with connected equipment and drives. Engineering design is verified by finite elements analysis for the determination of strenght and durability. The ending of thesis analyzes the production methods of designed engine block.
|
|
|
Possibility of Replacing the Formula Student Chain Secondary Transmission by Gearwheels
Košík, Matej ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
This thesis deals with research of possibilities of replacing secondary chain drive by gear with purpose to integrate secondary gear and differential into engine block of vehicle Formula Student. It compares single draft designs. The first part of thesis consists of an introduction to Formula Student competition and a research of parts of traction conversion unit and of the formula Dragon 9 internal combustion engine. In the second part multiple draft designs of secondary gearing were performed and then checked by strength calculations. The best version of replacing secondary gearing is bevel gear. It is complex issue to design a gear suitable for application in racing car, so I suggest further possibilities of optimisation the bevel gear.
|
|
|
Engine Block with Integrated differential for Formula Student
Marek, Jiří ; Šebela, Kamil (referee) ; Janoušek, Michal (advisor)
The diploma thesis deals with the design of the integration of limited slip differential of the formula student car into the engine block. To select suitable solution from several considered, a research analysis of possible concepts was first made and then the best possible solution was determined using a decision table. A 3D model was then made for the selected concept based on the original engine block, digitalized by using a laser 3D scanner. The resulting model was then evaluated and built into Dragon X.
|
guest ::
